HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 735

trackChangesSet 2 trackChangesSet Enables or disables track-changes feature. Synopsis trackchangesset [mode][, snmptrapmode] Description This command enables or disables the track-changes feature. An SNMP-TRAP mode can also be enabled. Trackable changes are: Successful login Unsuccessful login Logout Config file change from task Track-changes on Track-changes off The output from the track-changes feature is dumped to the error log for the switch. Use errDump or errShow to view the error log. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: mode Specify 1 to enable the track-changes feature or 0 to disable the feature. The default (if no operand is specified) is to disable the track-changes feature. This operand is optional. snmptrapmode Specify 1 to enable errors to be sent to the SNMP-TRAP in addition to the errlog or specify 0 to disable the SNMP-TRAP messages. The default (if no operand is specified) is to disable SNMP-TRAP messages. This operand is optional. Examples To enable the track-changes feature: switch:admin> trackchangesset 1, 1 Committing configuration...done. switch:admin> trackchangesshow Track changes status: ON Track changes generate SNMP-TRAP: YES See Also agtCfgSet, agtCfgShow, trackChangesHelp, trackChangesShow Fabric OS Command Reference Manual 703 53-1000436-01