HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 395

msConfigure 2 msConfigure Configures the Management Server (MS) access control list (ACL). Synopsis msconfigure Description Use this command to configure the MS ACL. MS allows a SAN management application to retrieve and administer the fabric and interconnect elements, such as switches. This application is located at the Fibre Channel well-known address, 0xFFFFFA. If the MS ACL is empty (default), MS is available to all systems connected to the fabric. By populating the MS ACL with one or more World Wide Names (WWNs), access to MS is restricted to those WWNs only. This command is interactive and provides the user with the following menu of choices: 0 Done (with the administration) 1 Display the ACL 2 Add member based on its port/node WWN 3 Delete member based on its port/node WWN If the MS ACL is changed by adding or deleting WWNs, an additional prompt is given asking if the MS ACL should be saved to nonvolatile storage. The saved MS ACL becomes effective upon reboot. The MS ACL is implemented on a per-switch basis and should be configured on the switch to which the management application is directly connected. When security is enabled, the MS ACL is not used. In such a case, access to MS is controlled by security by way of the MS_POLICY configuration. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Examples To display the MS ACL: switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 1 MS Access List consists of (5): { 20:01:00:60:69:00:60:10 20:02:00:60:69:00:60:10 20:03:00:60:69:00:60:10 20:02:00:60:69:00:60:03 20:02:00:60:69:00:60:15 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 Fabric OS Command Reference Manual 363 53-1000436-01