HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 289

fwConfigure 2 fwConfigure Displays and modifies the Fabric Watch configuration. Synopsis fwconfigure [--enable --port portNumber] | [--disable --port portNumber] Description Use this command to display and modify threshold information for the Fabric Watch configuration. Switch elements monitored by Fabric Watch are divided into classes, which are further divided into areas. Each area can include multiple thresholds. In addition, the command can be used to disable or enable all thresholds associated with a given port. This command requires a Fabric Watch license. Not all platforms support fans or power supplies. If you attempt to configure values for these items, an "ERROR: No threshold available" error message is displayed. The Fabric Watch classes and areas are provided in the table. TABLE 11 fwConfigure Fabric Watch Classes and Areas Class Area Environmental SFP Port Fabric Temperature Fan* Power Supply* Temperature RXP TXP Current Voltage Link failure Sync loss Signal loss Protocol error Invalid words Invalid CRCS RX Performance TX Performance State Changes E_Port downs Fabric reconfigure Domain ID changes Segmentation changes Zone changes FabricQL Fabric logins SFP state changes E_Port Same as Port class F/FL_Port (Optical) Same as Port class AL_PA Performance Monitor Invalid CRCS EE Performance Monitor Filter Performance Monitor Invalid CRCS RX Performance TX Performance Customer Defined Fabric OS Command Reference Manual 257 53-1000436-01