HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 455

perfMonitorClear 2 perfMonitorClear Clears counters of end-to-end, filter-based, and ISL performance monitors on a port. Synopsis perfmonitorclear --class monitor_class [slotnumber/]portnumber [monitorId] Description Use this command to clear counters for performance monitors on a port, specified by class.. Monitor classes include end-to-end monitors (EE), filter-based monitors (FLT), and interswitch link monitors (ISL). Issuing the portStatsClear command on a port clears all end-to-end and filter-based monitors (but not ISL monitors) for all the ports in the same quad. This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This operands are as follows: --class The monitor class, which can be one of EE (end-to-end), FLT (filter-based), or ISL (interswitch link). These values are case sensitive. This operand is required. slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. monitorId Specifies the monitor number to clear. Monitor numbers are defined are created, and can be displayed using perfMonitorShow. This operand is optional; if omitted, this command clears all monitor counters of the appropriate monitor_class on the port. This operand does not apply to ISL monitors. Examples To clear statistics counters for an end-to-end monitor: switch:admin> perfmonitorclear --class EE 1/2 5 End-to-End monitor number 5 counters are cleared switch:admin> perfmonitorclear --class EE 1/2 This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n): [no] y To clear statistics counters for a filter-based monitor: switch:admin> perfmonitorclear --class FLT 1/2 4 Filter-based monitor number 4 counters are cleared switch:admin> perfmonitorclear --class FLT 1/2 This will clear ALL filter-based monitors' counters on port 2, continue? (yes, y, no, y): [no] y To clear statistics counters for an ISL monitor: Fabric OS Command Reference Manual 423 53-1000436-01