HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 368

2 killTelnet killTelnet Terminates an open telnet session. Synopsis killtelnet Description Use this command to terminate an open telnet session. The killTelnet command is an interactive menu-driven command. Upon invocation, it lists all the current telnet and serial port login sessions. It lists information such as the session number, login name, idle time, IP address of the connection, and timestamp of when the login session was opened. A prompt is then displayed, at which point you can specify the session number of the connection you want to terminate. The list of open sessions displayed with killTelnet includes the user's current session. Make sure you do not kill your own telnet session. The execution of this command is subject to Admin Domain restrictions that may be in place. Examples To terminate an open telnet connection: switch:admin> killtelnet Collecting login information....Done List of telnet sessions (3 found) Session No USER TTY IDLE FROM LOGIN@ ~ 0 root0 ttyS0 1:17m - 5:13pm 1 admin0 pts/0 16.00s 192.168.130.29 6:29pm 2 admin0 pts/1 3.00s 192.168.130.29 6:31pm Enter Session Number to terminate (q to quit) 1 Collecting process information... Done. You have opted to terminate the telnet session:- logged in as "admin0 ", from "192.168.130.29 " since " 6:29pm" and has been inactive for "16.00s ", the current command executed being: "-rbash ". The device entry is: "pts/0 ". This action will effectively kill these process(es):- USER PID ACCESS COMMAND /dev/pts/0 root 12868 f.... login root 12869 f.... login root 12877 f.... rbash Please Ensure (Y/[N]): y killing session.... Done! Collecting login information....Done List of telnet sessions (2 found) _ Session No USER TTY IDLE FROM LOGIN@ ~ 0 root0 ttyS0 1:17m - 5:13pm 1 admin0 pts/1 3.00s 192.168.130.29 6:31pm Enter Session Number to terminate (q to quit) q See Also none 336 Fabric OS Command Reference Manual 53-1000436-01