HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 619
secPolicyRemove, Synopsis, Description, Operands, IP Address Member Policy Types
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 619 highlights
secPolicyRemove 2 secPolicyRemove Removes members from an existing policy. Synopsis secpolicyremove "name"[, "member [;member]"] Description Use this command to remove members from an existing security policy. If a policy is empty after removing all members, all accesses to the policy are disallowed (the DCC_POLICY and OPTIONS_POLICY are exceptions). You cannot remove all members from FCS_POLICY, and you cannot remove the FCS members from SCC_POLICY. When secure mode is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: "name" Specify the name of an existing policy you want to remove members from. Valid values for this operand are: DCC_POLICY_nnn FCS_POLICY TELNET_POLICY HTTP_POLICY API_POLICY RSNMP_POLICY WSNMP_POLICY SES_POLICY MS_POLICY SERIAL_POLICY FRONTPANEL_POLICY SCC_POLICY OPTIONS_POLICY The specified policy name must be capitalized. The DCC_POLICY policy name has the common prefix DCC_POLICY_ followed by a string of user defined characters. These characters do not have to be capitalized like regular policy names, but are case sensitive. This operand is required. "member" Specify a member or list of members to delete from the policy. The members must be enclosed in quotation marks and separated by semicolons. This operand is required. Depending on the policy type, members can be specified using IP address, WWN, domain, or switch name. IP Address Member Policy Types The following policy types require members be specified by IP address: TELNET_POLICY Fabric OS Command Reference Manual 587 53-1000436-01