HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 406
nbrStateShow, Synopsis, Description, switchShow, Operands, Examples, See Also, interfaceShow
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
2 nbrStateShow nbrStateShow Displays FSPF neighbor's state. Synopsis nbrstateshow [slotnumber/][portnumber] Description Use this command to display information about neighbors to the local switch, or information about a specific neighbor if a port number is supplied. FSPF defines a neighbor as a remote E_Port interface that is directly attached to the local switch. The following fields display: Local Domain ID Domain number of local switch. Local Port E_Port (interface) on local switch. This value is typically equal to the Area field reported in the switchShow command. Domain Domain number of remote switch. Remote Port E_Port (interface) on remote switch. State State of the neighbor. The E_Port is used to route frames only if the neighbor is in NB_ST_FULL state. Operands This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, all neighbor states are displayed. Examples To display information about switches directly connected to the local switch: switch:user> nbrstateshow 2/0 Local Domain ID: 1 Local Port Domain Remote Port State 16 2 48 NB_ST_FULL See Also interfaceShow 374 Fabric OS Command Reference Manual 53-1000436-01