HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 146
defZone, cfgEnable d_efault_Cfg
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
2 defZone defZone Activates or deactivates a default zone configuration. Synopsis defzone [--noaccess | --allaccess | --show] Description Use this command to set the Default Zone access mode to No Access, initialize a zoning transaction (if one is not already in progress), and create reserved zoning objects. This command requires a Brocade Advanced Zoning license. When security is enabled, this command can be issued only from the primary FCS switch. Names with the d_efault_ prefix are reserved for default zoning use. No editing of these objects is permitted. cfgShow does not display the names of the default zone objects. If d_efault_Cfg is the effective zone configuration, both cfgShow and cfgActvShow do not display d_efault_Cfg as the effective zone configuration. Operands This command has the following operands: --noaccess Sets the default zone access mode to No Access, initializes a zoning transaction (if one is not already in progress), and creates the reserved zoning objects equivalent to the following commands: cfgCreate "d_efault_Cfg", "d_efault_Zone" zoneCreate "d_efault_Zone", "00:00:00:00:00:00:00:01" A cfgSave, cfgEnable, or cfgDisable command must be performed subsequent to the use of this command to commit the changes and distribute them to the fabric; for example: switch:admin> defzone --noaccess switch:admin> cfgsave An audit log record is generated for each use of this command option. With No Access default zone activated, the following applies: When you issue a cfgDisable of the current effective zone configuration, the local switch converts it into a cfgEnable d_efault_Cfg command. When zoning receives a cfgDisable command from a remote switch that does not support default zoning, zoning rejects the cfgDisable command in the second phase of RCS because the remote switch does not convert the cfgDisable command to a cfgEnable d_efault_Cfg command. --allaccess Sets the default zone access mode to All Access, initiates a zoning transaction (if one is not already in progress), and deletes the reserved zoning objects by doing the equivalent to the following zoning commands: cfgDelete "d_efault_Cfg" zoneDelete "d_efault_Zone" 114 Fabric OS Command Reference Manual 53-1000436-01