HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 420

2 nsZoneMember nsZoneMember Displays the information of all the online devices zoned with the given device. Synopsis nszonemember -a | -u | pid | wwn Description Use this command to display information about all the online devices zoned with the given device. Issuing this command without operands displays all online devices zoned with the given device. Each line of output displays: Type U for unknown, N for N_Port, NL for NL_Port Pid The 24-bit Fibre Channel address COS A list of classes of service supported by the device PortName The device's port World Wide Name (WWN) NodeName The device's node WWN Permanent Port NamePhysical N_Port or NL_Port WWN DeviceType The device's type Port Index The port index this device is attached to Shared Area Whether this device shares an area with other devices Device Shared in Other ADWhether device is shared in other Admin Domains There might be additional lines if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): FC4 supported IP address (node) IPA port and node symbolic name (local device only) fabric port name hard address and/or port IP address Operands This command has the following operands: -a Displays each local device's online zoned device data, including the PID and zone alias. -u Displays all the unzoned devices in the entire fabric. The device data displayed includes the device PID and zone alias. pid | wwn Specifies the port ID or WWN, respectively, whose zoned devices are to be viewed. This operand is required. Examples To display information about all the online devices zoned with the given device: switch:admin> nszonemember 0x0416e2 3 local zoned members: Type Pid COS PortName NodeName SCR NL 041901; 2,3;10:00:00:00:c9:26:0e:ae;20:00:00:00:c9:26:0e:ae; 3 388 Fabric OS Command Reference Manual 53-1000436-01