HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 725
sysShutdown, Synopsis, Description, Operands, Examples
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 725 highlights
sysShutdown 2 sysShutdown Provides a graceful shutdown to protect the switch file systems. Synopsis sysshutdown Description For Brocade (nonbladed) switches, use this command to shutdown the switch operating system. For Brocade directors, when sysShutdown is called in the active control processor (CP), the command shuts down the active CP, standby CP, and any AP blades. After doing this, you need to manually power off the system. If you want to reboot the system, manually turn the power switch on. This command is not supported on the standby CP. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Examples To perform a system shutdown in a Brocade switch: switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]? y Broadcast message from root (ttyS0) Mon Sep 12 17:52:12 2005... The system is going down for system halt NOW !! INIT: Switching to runlevel: INIT: Sending processes the TERM signal ess095:root> Unmounting all filesystems. The system is halted flushing ide devices: hda Power down. To perform a system shutdown from the active CP in a dual-CP platform: switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]? y This is the active Cp 2005/09/13-01:15:13, [FSSM-1003], 414,, WARNING, Brocade48000, HA State out of sync HA is disabled Broadcast message from root (ttyS0) Tue Sep 13 01:15:14 2005... The system is going down for system halt NOW !! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal Unmounting all filesystems. umount2: Device or resource busy umount: /tmp: device is busy The system is halted flushing ide devices: hda Power down. ppc440gx System Halted Fabric OS Command Reference Manual 693 53-1000436-01