HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 731

topologyShow 2 topologyShow Displays the unicast fabric topology. Synopsis topologyshow [domain] Description Use this command to display the fabric topology, as it appears to the local switch, including: A list of all domains that are part of the fabric, and to each of those domains, all possible paths from the local switch. For each path cost, the associated output port on the local switch, the path cost, the number of hops from the local switch to the destination switch and a summary of all ports are routed through that path. The display contains the following fields: Local Domain ID Domain number of local switch. Local Translate Domain x owned by port Port number associated with the local translate domain x. Domain Domain number of destination switch. Metric Cost of reaching destination domain. Name The name of the destination switch. Path Count The number of currently active paths to the destination domain. Hops The maximum number of hops to reach destination domain. Out Port Port to which incoming frame are forwarded to reach the destination domain. In Ports Input ports that use the corresponding out port to reach the destination domain. This is the same information provided by portRouteShow and uRouteShow but in a different format. Total Bandwidth The maximum bandwidth of the out port. A bandwidth that is less than 0.512 Gbit/sec is adjusted to the nearest power of 2 value, while a bandwidth that is ranged from 0.512 Gbit/sec (included) to 1 Gbit/sec (no included) is adjusted to the 0.512 Gbit/sec value. There is no adjustment to the value if a bandwidth is greater or equal to 1 Gbit/sec. Bandwidth Demand The maximum bandwidth demand by the in ports. Flags Always D, indicating a dynamic path. A dynamic path is discovered automatically by the FSPF path selection protocol. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operand: domain Specify the destination domain for which topology information is to be displayed. This operand is optional; if omitted, this command displays the topology information of all the domains in the fabric. Examples To display the unicast fabric topology: Fabric OS Command Reference Manual 699 53-1000436-01