HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 281

fosConfig 2 --show "FC Routing service is already disabled" - This means that the FC Routing service is already disabled. Use switchShow to display the current state of the FC Routing service. iSCSI The iSCSI service will be disabled on this switch. This command can be run while the switch state is "online". iSNSC The iSNSC service will be disabled on this switch. This command can be run while the switch state is "online". Displays the current operating status of features on the switch. The features shown here may not be supported on all platforms. If you attempt to enable a feature that is not supported on your platform, an error message stating "Command not supported on this platform" is displayed. Examples To display the status of the features: switch:admin> fosconfig --show FC Routing service: iSCSI service: iSNS Client service: enabled enabled disabled To disable the FC Routing service: switch:admin> fosconfig --disable fcr FC Routing service is disabled To enable the FC Routing service: switch:admin> fosconfig --enable fcr FC Routing service is enabled To enable the iSCSI service: switch:admin> fosconfig --enable iscsi iSCSI service is enabled To disable the iSCSI service: switch:admin> fosconfig --disable iscsi iSCSI service is disabled See Also fcrConfigure, iscsiCfg, iscsiPortCfg, isnscCfg, switchShow Fabric OS Command Reference Manual 249 53-1000436-01