HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 174

2 dnsConfig dnsConfig Sets, displays, or removes domain name service (DNS) parameters. Synopsis dnsconfig Description Use this command to display, set, or remove the domain name service parameters. The domain name service parameters are the domain name and the name server IP address for primary and secondary name servers. The dnsconfig command displays IPv4 and IPv6 addresses. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Examples To set the DNS parameters for the system: switch:admin> dnsconfig Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 Remove DNS configuration 4 Quit Select an item: (1..4) [4] 2 Enter Domain Name: [] domain.com Enter Name Server IP address in dot notation: [] 123.123.123.123 Enter Name Server IP address in dot notation: [] 123.123.123.124 DNS parameters saved successfully Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 Remove DNS configuration 4 Quit Select an item: (1..4) [4] 4 See Also configDownload, configUpload, firmwareDownload, ipAddrSet, ipAddrShow 142 Fabric OS Command Reference Manual 53-1000436-01