HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 329

interfaceShow 2 Operands This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, the interface information for all ports is displayed. When no slot number and port number are specified, this command displays the interface information for all ports on the switch (including non-E_Ports). Examples To display FSPF interface information: switch:user> interfaceshow 1/4 idbP = 0x1008b3d0 Interface 4 data structure: nghbP ifNo masterPort defaultCost cost delay lastScn lastScnTime upCount lastUpTime downCount lastDownTime downReason iState = 0x1008c668 = 4 = 4 (self) = 500 = 500 = 1 = 16 = Apr 02 20:01:44.458 = 2 = Apr 02 20:01:44.458 = 1 = Apr 02 20:01:09.050 = 2 = UP Neighbor 4 data structure: state = NB_ST_FULL lastTransition = Apr 02 20:01:44.512 nghbCap = 0x0 nghbId = 100 idbNo = 4 remPort = 52 nflags = 0xf initCount = 1 lastInit = Apr 02 20:01:44.460 firstHlo = Apr 02 20:01:44.473 nbstFull = Apr 02 20:01:44.512 delay = 1 lastScn = 16 &dbRetransList = 0x1008c6a0 &lsrRetransList = 0x1008c6c4 &lsrAckList = 0x1008c6e8 inactTID = 0x1008c768 helloTID = 0x1008c7a0 dbRtxTID = 0x1008c7d8 lsrRtxTID = 0x1008c848 inactTo = 80000 helloTo = 20000 (continued on next page) Fabric OS Command Reference Manual 297 53-1000436-01