HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 795

RBAC Command Availability Appendix A This appendix explains how a command is validated when it is typed at the command prompt. A command must be validated based on the user account's role before the command is executed. Validation is done with these checks, in this order: 1. Active/Standby availability: on chassis-based systems, check that the command is available on the Control Processor (CP). 2. RBAC availability: check that the invoking user's role is permitted to invoke the command. If the command modifies system state, the user's role must have modify permission for the command. If the command only displays system state, the user's role must have observe permission for the command. Some commands both observe and modify system state and thus require observe-modify permission. 3. Admin Domain availability: check that the command is allowed in the currently selected Admin Domain. 4. Command-specific: checks such as whether the command is supported on the platform for which it is targeted, etc. Refer to Table 1 for the RBAC availability of all commands, as used by Fabric OS in Step 2. TABLE 1 RBAC Availability of All Commands (O = observe, OM = observe-modify, N = none/not available) Command Name User Admin Operator Switch Admin Zone Admin Fabric Admin Basic Switch Admin Security Admin aaaConfig ad ag agshow agtcfgDefault agtcfgSet agtcfgShow aliAdd aliCreate aliDelete aliRemove aliShow N OM N OM O OM O OM O OM O OM O OM O OM O OM O OM O OM O OM N N N N OM OM OM OM O OM O OM O OM O O O O O O O O O O N N N N O OM O OM N OM N OM N OM OM OM OM OM OM OM OM OM OM OM N OM N O/OM OM N O N O OM O OM O OM O O O O O O O O O O Fabric OS Command Reference Manual 763 53-1000436-01