HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 260

2 ficonShow Incident Count Displays the incident count. This number increases by 1 for each incident within the individual switch. Link Incident Description Same as Link Incident Type. Link Incident Type Indicates the link incident type as one of the following: Bit-error-rate threshold exceeded Loss of signal or synchronization NOS recognized Primitive sequence timeout Invalid primitive sequence for port state Listener PID Same as PID. Listener Port Type Same as Port Type. Listener Port WWN Displays the channel HBA port World Wide Name. Listener Type Indicates the listener type as follows: Conditional This port receives a link incident record if no other recipients from the established registration list have been chosen. Unconditional This port is always chosen as a recipient of a link incident record. Manufacturer Displays the manufacturer name or code. Model Number Displays the model number. Node Parameters Same as Parameters. Parameters Displays the node type for the switch in three bytes, 0xAABBCC: Byte AA 0x20 FC-SB-2 and updates. Byte BB Switch. 0x0a Byte CC 0x00 Port number. It is dynamically assigned whenever a link incident occurs. Parm Displays the incident node parameters type in three bytes, 0xAABBCC: Byte AA 0x00 Reserved. 0x20 FC-SB-2 and updates. 0x40 Other FC-4s including FCP and updates. 0x60 FC-SB-2 and updates and other FC-4s including FCP and updates. 0x80 FC-4 support not specified. 0xa0 Reserved. 0xc0 Reserved. 228 Fabric OS Command Reference Manual 53-1000436-01