HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 592

2 secFabricShow secFabricShow Displays security-related fabric information. Synopsis secfabricshow Description This command displays the security-related information about the fabric. The information displayed is as follows: Role Displays whether the switch is the primary FCS, backup FCS, or not FCS. WWN Displays the World Wide Name of the switch. DId Displays the domain of the switch. Status Displays the security state of the switch. Ready This switch is in a stable state. Busy This switch is updating its security database. Error This switch's security database is inconsistent with the primary FCS. Enet IP Addr Displays the static IPV6 and IPV4 addresses. Name Displays the switch name. NoResp Displays if the switch did not respond to the status query. Unknown Displays if the switch is in an unknown state. This command can only be issued in secure mode. This command must be issued from a sectelnet or SSH session. When this command is issued on multiple switches in the fabric, one or more of these switches can display a status of busy. Operands none Examples To display security-related fabric information on the primary FCS switch having only IPV4 address configuration primaryfcs:admin> secFabricShow S non-FCS 10:00:00:60:69:10:03:23 1 Ready 0.0.0.0 sw1 Backup 10:00:00:60:69:00:12:53 2 Ready 0.0.0.0 sw2 Primary 10:00:00:60:69:22:32:83 3 Ready 0.0.0.0 sw3 Secured switches in the fabric: 3 IPV6 configured switches may have a link local address, an optional statically configured IPv6 address and up to N auto configured IPv6 addresses. When IPv6 addresses are configured in the fabric, only the static ipaddress is displayed under the Enet IP Addr field and the IPv4 address information. 560 Fabric OS Command Reference Manual 53-1000436-01