HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 402

2 msTdDisable msTdDisable Disables the Management Server (MS) topology discovery service. Synopsis mstddisable ["ALL"] Description Use this command to disable the management server topology discovery service of a local switch or an entire fabric. This change takes effect immediately and commits to the configuration database for all switches; therefore, persistent across power cycles and reboots. If the "ALL" operand is used, this command attempts to disable the topology discovery service on all switches in the fabric. When security is enabled, and using the "ALL" operand, this command can be issued only from the primary FCS switch. This command is supported only in AD0 and AD255 contexts. The execution of this command is subject to Admin Domain restrictions that may be in place. Limitations Topology Discovery Management requires the attached devices which include attached switches to support RNID ELS. Operands The optional operand is as follows: "ALL" Disables the MS topology discovery service throughout the entire fabric. Examples To disable the MS topology discovery service on the local switch only: switch:admin> mstddisable This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y Request to disable MS Topology Discovery Service in progress.... done. *MS Topology Discovery disabled locally. To disable MS topology discovery on all the switches in the fabric: switch:admin> mstddisable "ALL" This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y Request to disable MS Topology Discovery Service in progress.... done. *MS Topology Discovery disabled locally. *MS Topology Discovery Disable Operation Complete!! See Also msTdEnable, msTdReadConfig 370 Fabric OS Command Reference Manual 53-1000436-01