HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 622

2 secPolicySave secPolicySave Saves a defined security policy to persistent memory on all switches in the fabric. Synopsis secpolicysave Description Use this command to save a defined security policy to persistent memory of all switches in the fabric. Secpolicysave saves the modified SCC, DCC, and FCS policies to Defined Security Policy Set on the local switch. This command is always a local switch operation. When secure mode is enabled, this command saves Defined Security Policy to persistent memory on all switches in the fabric and can be issued only from the primary FCS switch. NOTE A fabric-wide consistency configuration does not affect the behavior of this command. Operands none Example To save defined policy set to persistent memory: switch:admin> secpolicysave secpolicysave command was completed successfully. See Also fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete, secPolicyDump, secPolicyRemove, secStatsShow 590 Fabric OS Command Reference Manual 53-1000436-01