HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 769

zoneObjectCopy 2 zoneObjectCopy Copies a zone object. Synopsis zoneObjectCopy "objectName", "newName" Description Use this command to copy a zone object to a new zone object. The resulting object has the same type as the original object. You can use this command for all zone object types, including cfg, zone, and alias. A zone configuration name must begin with a letter that can be followed by any number of letters, numbers, and underscores. Names are case sensitive; for example, "Cfg_1" and "cfg_1" are different zone configurations. Spaces are ignored. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Refer to the zoneCreate command for more information on name and member specifications. This command requires a Brocade Advanced Zoning license. When secure mode is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: "objectName" The name of the object that you want to copy. Quotation marks are optional. This operand is required. "newName" The name of the object that you want created. Quotation marks are optional. This operand is required. Examples To create a configuration containing three zones: switch:admin> cfgshow "*" cfg: USA_cfg Red_zone; White_zone; Blue_zone switch:admin> zoneobjectcopy "USA_cfg", "UK_cfg" switch:admin> cfgshow "*" cfg: UK_cfg Red_zone; White_zone; Blue_zone cfg: USA_cfg Red_zone; White_zone; Blue_zone See Also cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow, zoneObjectRename Fabric OS Command Reference Manual 737 53-1000436-01