HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 632

2 secVersionReset secVersionReset Resets the security version stamp to 0. Synopsis secversionreset Description Use this command to reset the security version stamp of all switches in a fabric to 0, so that it can be joined to another secure fabric. When merging two or more secure fabrics: Determine which secure fabric will become the FCS_POLICY controller fabric, the dominant fabric to which all other secure fabrics will be merged. Use the secPolicyAdd, secPolicyRemove, and secPolicyActivate commands to modify the FCS_POLICY of the merging fabrics to match the FCS_POLICY of the controller fabric. All secure fabrics to be merged must have identical FCS_POLICY lists. The FCS policies of merged fabrics must match exactly; they must contain the same FCS members and in the same order, or the merge will fail. Reset the version stamp using the secVersionReset command on each secure fabric to be merged into the controller fabric. The controller fabric does not require a version reset. Cascade the fabrics together. When the secure fabrics merge, the primary FCS switch in the controller fabric propagates its security policies across the newly formed fabric. This command can be issued only in secure mode and only from the primary FCS switch, a nonFCS when there is no FCS switch in the fabric, or from a disabled switch. Operands none Examples To reset the version stamp to 0: switch:admin> secversionreset About to reset version stamp to 0. Are you sure (yes, y, no, n):[no] y done. Security Policy Version Stamp has been set to 0. See Also secFabricShow, secModeDisable, secModeEnable, secModeShow, secTransAbort 600 Fabric OS Command Reference Manual 53-1000436-01