HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 161

diagRetry 2 diagRetry Sets or displays diagnostic retry mode. Synopsis diagretry [mode | -show] Description Use this command to enable retry mode if the mode value is nonzero and to disable the retry mode if the mode value is 0. The mode is saved in flash memory (and stays in that mode) until the next execution of diagRetry. The mode becomes active as soon as this command is executed; it does not require a reboot to take effect. Retry mode modifies the behavior of the diagnostic test methods, power-on self-test (POST), and burn-in scripts. The exact behavior depends on the tests and scripts that are run. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following optional operands: mode Specify 1 to enable, 0 to disable retry mode. -show Specify this operand to display the current mode setting. If no operand is specified, the current value is displayed. Examples To view the current retry mode value: switch:admin> diagretry -show Diagnostic Retry Mode is currently enabled. See Also none Fabric OS Command Reference Manual 129 53-1000436-01