HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 185

fabPortShow 2 0x00000800 Zoning has completed 0x00001000 Segmented by Platform Management 0x00002000 Segmented due to no license 0x00004000 Segmented due to E_Port disabling 0x00008000 DIA already sent for that port 0x00010000 RDI already sent 0x00020000 Port is true T port 0x00040000 Port received an ELP 0x00080000 Port received an ELP RJT 0x00100000 LR pending due to ELP RJT rcv 0x00200000 Received a DIA on this port 0x00400000 Port is the EMT Initiator 0x00800000 Security violation 0x01000000 Security incompatibility 0x02000000 Rcv a DIA ACC 0x040000000 Port is security authenticating 0x080000000 ECP RJT or retires exceeded 0x100000000 Segmented due to duplicated WWN 0x200000000 Segmented due to E_Port isolation nbrWWN Neighboring switch's WWN nbrPort Neighboring switch's port lr_tid Link reset timer identifier and current state. red_ports All E_Ports that are connected to the same neighboring switch The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port to display, followed by a slash (/). portnumber Specifies the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. Examples To display fabric port information: switch:admin> fabportshow 4/14 Fabric Port Information Port: State: List: List Count: 62 P3 0x10068418 0 Fabric OS Command Reference Manual 153 53-1000436-01