HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 498

2 portCfgLPort portCfgLPort Configures a port as an L_Port. Synopsis portcfglport [slotnumber/]portnumber locked_mode [private_mode] [duplex_mode] Description Use this command to designate a port as an L_Port. The switch then only attempts to initialize that port as an FL_Port. By default, the L_Port is a public L_Port. It could be set to private L_Port and the FLOGI will be rejected. This configuration can be cleared but not set on VE/VEX_Ports. The switch never attempts point-to-point (F_Port) initialization on the port. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands The operands are as follows: slotnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). portnumber Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if omitted, this command displays the L_Port conditions for all ports. locked_mode Specify 1 to configure the specified port as a locked L_Port. Specify 0 to deconfigure the specified port from its previous role as a locked L_Port. This operand is required if portnumber is specified. private_mode Specify 1 to configure the L_Port as a private L_Port. Specify 0 to configure the L_Port as a normal public L_Port. This operand is optional; if omitted; the default value of 0 is used. Private devices are supported only on Brocade 3250, 3850, and 3900 and directors with FC2-16 and FC2-16 blades. For other switches and blade types, option 1 is blocked. duplex_mode Specify 2 to configure the specified port as a full-duplex L_Port with fairness. Specify 1 to configure the L_Port as a half-duplex L_Port with fairness. Specify 0 to configure the L_Port as a full-duplex L_Port. This operand is optional; if omitted, the default value of 0 is used. If used without operands, this command reports the L_Port conditions for all ports present. Examples To configure a port as a locked L_Port: switch:admin> portcfglport 4/15, 1 switch:admin> portcfgshow [output from other slots suppressed] Ports of Slot 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON Long Distance VC Link Init Locked L_Port ON Locked G_Port Disabled E_Port ISL R_RDY Mode Persistent Disable 466 Fabric OS Command Reference Manual 53-1000436-01