HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 138

2 configure Application Attributes Application HTTP, SNMP, and RPCd attributes are configurable; by default, all three attributes are enabled. Refer to the table for the application attributes that can be changed. TABLE 8 Configurable Application Attributes Application File Type Default Range ssl http snmp rpcd cfgload Certificate File CA Certificate File Length of crypto key HTTP Enabled Secure HTTP Enabled SNMP Security Level RPCd Enabled Secure RPCd Callback Secure Config Upload and Download string string number boolean boolean number boolean boolean boolean not set not set 128 Yes Off 0 On Off Off varies varies 40, 56, 128 Yes/No On/Off 0, 1, 2 On/Off On/Off On/Off The secure protocols must not be enabled before setting SSL attributes correctly. Operands none Examples To modify configuration settings on a switch: switch:admin> configure configure System services (yes, y, no, n): [no] ssl attributes (yes, y, no, n): [no] snmp attributes (yes, y, no, n): [no] y Select SNMP Security Level: (0 = No security, 1 = Authentication only, 2 = Authentication and Privacy): (0..2) [0] :See Also agtCfgDefault, agtCfgSet, agtCfgShow, configDefault, configShow, ipAddrSet, portCfgLongDistance, switchDisable, switchEnable, upTime 106 Fabric OS Command Reference Manual 53-1000436-01