HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 500

2 portCfgNPort portCfgNPort Enables and disables N_Port functionality for an Access Gateway port. Synopsis portcfgnport [port_number] | [mode] Description Use this command to configure the Access Gateway port as an N_Port in the case where the AG port is connected to the enterprise fabric. The enabled N_Port will automatically come online if it is connected to the enterprise fabric switch that supports NPIV. The N_Port must have NPIV capability enabled. NOTE NPIV capability should be enabled on the ports connected to the Access Gateway. Use portcfgnpivport to enable NPIV capability on the specific port. By default, NPIV is enabled on Goldeneye. Operands This command has the following operands: port number The N_Port number to enable or disable. mode Displays current agmode setting for the switch. The default value for mode is 0 (disabled) and if the value 1 (enabled). Examples To enable N_Port functionality for a port: switch:admin> portcfgnport 2 1 To enable N_Port functionality for a set of ports in a specific range: switch:admin> portcfgnport 2-3 1 To display the N_Port configuration for all the ports: switch:admin> portcfgnport Ports 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Locked N_Port .. .. .. ON ON or switch:admin> portcfgshow Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN Locked N_port .. .. .. ON ON Persistent Disable : See Also portCfgShow 468 Fabric OS Command Reference Manual 53-1000436-01