Netgear M5300-52G3 Web Management User Guide - Page 106

ProSafe M5300 Switch The following table describes the LLDP-MED Remote Device Information fields. Field Description Remote ID Specifies the remote client identifier assigned to the remote system. Capability Information: Specifies the supported and enabled capabilities that was received in MED TLV on this port. Supported Capabilities Specifies supported capabilities that was received in MED TLV on this port. Enabled Capabilities Specifies enabled capabilities that was received in MED TLV on this port. Device Class Specifies device class as advertised by the device remotely connected to the port. Network Policy Information: Specifies if network policy TLV is received in the LLDP frames on this port. Media Application Type Specifies the application type. Types of application types are unknown, voicesignaling, guestvoice, guestvoicesignalling, softphonevoice, videoconferencing, streammingvideo, vidoesignalling. Each application type that is received has the VLAN id, priority, DSCP, tagged bit status and unknown bit status. A port may receive one or many such application types. If a network policy TLV has been receive on this port only then would this information be displayed. VLAN Id Specifies the VLAN id associated with a particular policy type. Priority Specifies the priority associated with a particular policy type. DSCP Specifies the DSCP associated with a particular policy type. Unknown Bit Status Specifies the unknown bit associated with a particular policy type. Tagged Bit Status Specifies the tagged bit associated with a particular policy type. Configuring System Information 106