Netgear M5300-52G3 Web Management User Guide - Page 422
DAI Configuration, Control> Dynamic ARP Inspection
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 422 highlights
ProSafe M5300 Switch DAI Configuration To display the DAI Configuration page, click Security Control> Dynamic ARP Inspection DAI Configuration. To configure global DAI settings: 1. Use Validate Source MAC to choose the DAI Source MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC validation for the ARP packets will be enabled. The factory default is disable. 2. Use Validate Destination MAC to choose the DAI Destination MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC validation for the ARP Response packets will be enabled. The factory default is disable. 3. Use Validate IP to choose the DAI IP Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, IP Address validation for the ARP packets will be enabled. The factory default is disable. DAI VLAN Configuration To display the DAI VLAN Configuration page, click Security Control> Dynamic ARP Inspection DAI VLAN Configuration. To configure global DAI VLAN settings: 1. VLAN ID - Select the DAI Capable VLANs for which information has to be displayed or configured. 2. Use Dynamic ARP Inspection to indicate whether the Dynamic ARP Inspection is enabled on this VLAN. If this object is set to 'Enable' Dynamic ARP Inspection is enabled. If this object is set to 'Disable', Dynamic ARP Inspection is disabled. Managing Device Security 422