Netgear M5300-52G3 Web Management User Guide - Page 53

ProSafe M5300 Switch DHCP Relay If the switch is functioning as a Layer 3 device, the Layer 3 DHCP Relay Agent can relay DHCP messages between DHCP clients and DHCP servers that are located in different IP subnets. To display the DHCP Relay page, click System > Services> DHCP Relay. A screen similar to the following displays. DHCP Relay Configuration To configure the DHCP Relay information: 1. Use Maximum Hop Count to enter the maximum number of hops a client request can take before being discarded. The range is (1 to 16). The default value is 4. 2. Use Admin Mode to select enable or disable radio button. When you select 'enable' DHCP requests will be forwarded to the IP address you entered in the 'Server Address' field. 3. Use Minimum Wait Time to enter a Minimum Wait Time in seconds. This value will be compared to the time stamp in the client's request packets, which should represent the time since the client was powered up. Packets will only be forwarded when the time stamp exceeds the minimum wait time. The range is (0 to 100). 4. Use Circuit ID Option Mode to enable or disable Circuit ID Option mode. If you select 'enable' Relay Agent options will be added to requests before they are forwarded to the server and removed from replies before they are forwarded to clients. Configuring System Information 53