Netgear M5300-52G3 Web Management User Guide - Page 167

ProSafe M5300 Switch MLD Snooping From the MLD Snooping link, you can access the following pages: • MLD Snooping Configuration on page 167 • MLD Snooping Interface Configuration on page 168 • MLD VLAN Configuration on page 169 • Multicast Router Configuration on page 170 • Multicast Router VLAN Configuration on page 170 • MLD Snooping Querier Configuration on page 171 • MLD Snooping Querier VLAN Configuration on page 172 MLD Snooping Configuration Use this menu to configure the parameters for MLD Snooping, which is used to build forwarding lists for multicast traffic. Note that only a user with Read/Write access privileges may change the data on this screen. To access the MLD Snooping Configuration page, click Switching Multicast  MLD Snooping  Configuration. To configure global MLD snooping settings: 1. Use MLD Snooping Admin Mode to select the administrative mode for MLD Snooping for the switch. The default is disable. 2. Click APPLY to apply the new settings to the switch. Configuration changes take effect immediately 3. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Field Multicast Control Frame Count Interfaces Enabled for MLD Snooping Data Frames Forwarded by the CPU VLAN Ids Enabled For MLD Snooping Definition The number of multicast control frames that are processed by the CPU. A list of all the interfaces currently enabled for MLD Snooping. The number of data frames forwarded by the CPU. Displays VLAN Ids enabled for MLD snooping. Configuring Switching Information 167