Netgear M5300-52G3 Web Management User Guide - Page 277

ProSafe M5300 Switch Route Redistribution This screen can be used to configure the OSPFv3 Route Redistribution parameters. The allowable range for each field is displayed next to it. If an invalid value is entered in one or multiple fields, an alert message will be displayed with the list of all the valid values. To display the Route Redistribution page, click Routing OSPFv3 Advanced  Route Redistribution. 1. Use Source to select those Source Protocols that have already been configured for redistribution by OSPFv3. The valid values are 'Static' and 'Connected'. 2. Use Redistribute Option to enable or disable the redistribution for the selected source protocol. 3. Use Metric to set the metric value to be used as the metric of redistributed routes. This field displays the metric if the source was pre-configured and can be modified. The valid values are 0 to 16777214. 4. Use Metric Type to set the OSPFv3 metric type of redistributed routes. 5. Use Tag to set the tag field in routes redistributed. This field displays the tag if the source was pre-configured, else a default tag value of 0 is displayed. The valid values are 0 to 4294967295. Routing 277