Netgear M5300-52G3 Web Management User Guide - Page 326

ProSafe M5300 Switch MLD Proxy Interface Configuration To display the MLD Proxy Interface Configuration page, click Routing IPv6 Multicast MLD  Proxy Interface Configuration. To configure MLD proxy interface settings: 1. Use Interface to select the interface to be configured. 2. Use Admin Mode to set the administrative status of MLD Proxy on the selected interface. The default is disable. Routing, MLD and Multicast global admin modes should be enabled to enable MLD Proxy interface mode. 3. Use Version to enter the version of MLD you want to configure on the selected interface. Valid values are 1 to 2 and the default value is 3. This field is configurable only when MLD Proxy interface mode is enabled. 4. Use Unsolicited Report Interval to enter the unsolicited time interval value in seconds. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. Valid values are from 1 to 260. The default value is 1. Field IPv6 Prefix Prefix Length Operational Mode Number of Groups Version 1 Querier Timeout Proxy Start Frequency Description The IPv6 address of the MLD Proxy interface. The prefix length for the IPv6 address of the MLD Proxy interface. The operational state of MLD Proxy interface. The current number of multicast group entries for the MLD Proxy interface in the cache table. The older MLD version 1 querier timeout value in seconds. The Older Version Querier Interval is the time-out for transitioning a host back to MLDv2 mode once an older version query is heard. When an older version query is received, hosts set their Older Version Querier Present Timer to Older Version Querier Interval. The number of times the proxy was brought up. Routing 326