Netgear M5300-52G3 Web Management User Guide - Page 43

ProSafe M5300 Switch The following table displays Summary information, which describes the maximum resources each template supports for various features.. Field SDM Template ARP Entries IPv4 Unicast Routes IPv6 NDP Entries IPv6 Unicast Routes ECMP Next Hops IPv4 Multicast Routes IPv6 Multicast Routes Description Identifies the Template. The possible values are: • Dual IPv4 and IPv6 • IPv4-routing Default • IPv4 Data Center The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces. The maximum number of IPv4 unicast forwarding table entries. The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries. The maximum number of IPv6 unicast forwarding table entries. The maximum number of next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables. The maximum number of IPv4 multicast forwarding table entries. The maximum number of IPv6 multicast forwarding table entries. License From the License link under the System tab, you can view information about the switch license. Note: The Licence feature is not available on all switch models. The License link provides access to the following pages: • License Key on page 43 • License Features on page 44 License Key Use the License Key page to view information about the license(s) on the device. Some features might require a special license in order to be active. If a license is not active, the feature associated with the license is not available and cannot be configured. To display the License Key page, click System > License > License Key. A screen similar to the following displays. Configuring System Information 43