Netgear M5300-52G3 Web Management User Guide - Page 329

ProSafe M5300 Switch Static Routes Configuration To display the Static Routes Configuration page, click Routing IPv6 Multicast Static Routes Configuration. To configure static IPv6 multicast routes: 1. Use Source IP to enter the IP Address that identifies the multicast packet source for the entry you are creating. 2. Use Prefix Length to enter the Prefix Length to be applied to the Source IPv6 address. 3. Use RPF Neighbor to enter the IP address of the neighbor router on the path to the source. 4. Use Metric to enter the link state cost of the path to the multicast source. The range is 0 - 255 and the default is 1. You can change the metric for a configured route by selecting the static route and editing this field. 5. Use RPF Interface to select the interface number from the drop-dead menu. This is the interface that connects to the neighbor router for the given source IP address. 6. Click ADD to add a new static route to the switch. 7. Click DELETE to delete the multicast static routes selected. Routing 329