Netgear M5300-52G3 Web Management User Guide - Page 335
CoS Interface Configuration, Interface, IP DSCP, CANCEL, APPLY, CoS> Advanced > CoS
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
ProSafe M5300 Switch To map DSCP values to queues: 1. Use Interface to specify CoS configuration settings based per-interface or specify all CoS configurable interfaces. 2. The IP DSCP field displays an IP DSCP value from 0 to 63. 3. For each DSCP value, specify which internal traffic class to map the corresponding IP DSCP value. The queue number depends on specific hardware. 4. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. If you make changes to the page, click APPLY to apply the changes to the system. CoS Interface Configuration Use the CoS Interface Configuration page to apply an interface shaping rate to all interfaces or to a specific interface. To display the CoS Interface Configuration page, click QoS CoS> Advanced > CoS Interface Configuration. To configure CoS settings for an interface: 1. Use Interface to specify all CoS configurable interfaces. 2. Use Interface Trust Mode to specify whether to trust a particular packet marking at ingress. Interface Trust Mode can only be one of the following. Default value is trust dot1p. • untrusted • trust dot1p • trust ip-dscp Configuring Quality of Service 335