Netgear M5300-52G3 Web Management User Guide - Page 83
Basic PoE Configuration, System, Services, Basic, Configuration, Static, Dynamic, APPLY, CANCEL
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
ProSafe M5300 Switch Basic PoE Configuration Use the PoE Configuration page to view global PoE power information and to configure PoE settings. To display the Basic PoE Configuration page, click System > Services > PoE > Basic > PoE Configuration. A screen similar to the following displays. To configure PoE trap settings: 1. If you are managing a stack of switches, select the ID of the stack member to configure from the Unit menu. 2. Specify the percentage of the threshold power that must be consumed before a trap is sent. 3. Select the power management algorithm the switch uses to deliver power to the requesting PDs. • Static. The Power allocated for each port depends on the type of power threshold configured on the port. • Dynamic. The power consumption of each port is measured and calculated in real-time. 4. Select the appropriate radio button to enable or disable SNMP traps for PoE. 5. Click APPLY to apply the new settings to the system. 6. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. Click REFRESH to update the screen with the current information. Configuring System Information 83