Netgear M5300-52G3 Web Management User Guide - Page 125
Port PVID Configuration, Switching, Advanced, Interface, Con d PVID, Current PVID
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
ProSafe M5300 Switch Port PVID Configuration The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. There are certain requirements for a PVID: • All ports must have a defined PVID. • If no other value is specified, the default VLAN PVID is used. • If you want to change the port's default PVID, you must first create a VLAN that includes the port as a member. • Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port. To access the Port PVID Configuration page, click Switching VLAN Advanced Port PVID Configuration. To configure PVID information: 1. Click ALL to display information for all Physical ports and LAGs. 2. Select the check box next to the interfaces to configure. You can select multiple interfaces to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 3. Use Interface to select the interface you want to configure. 4. Use Configured PVID to specify the VLAN ID you want assigned to untagged or priority tagged frames received on this port. The factory default is 1. The Current PVID field shows the PVID currently in use on the interface. 5. Use Acceptable Frame Types to specify the types of frames that may be received on this port. The options are 'VLAN only' and 'Admit All': • When set to VLAN only, untagged frames or priority tagged frames received on this port are discarded. • When set to Admit All, untagged frames or priority tagged frames received on this port are accepted and assigned the value of the Port VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN specification. Configuring Switching Information 125