Netgear M5300-52G3 Web Management User Guide - Page 446

ProSafe M5300 Switch 2. Configure the desired criteria for the new rule. • Rule ID - Specify a number from 1-12 to identify the IP ACL rule. You can create up to 12 rules for each ACL. • Action - Selects the ACL forwarding action, which is one of the following: • Permit - Forwards packets which meet the ACL criteria. • Deny - Drops packets which meet the ACL criteria. • Logging - When set to 'Enable', logging is enabled for this ACL rule (subject to resource availability in the device). If the Access List Trap Flag is also enabled, this will cause periodic traps to be generated indicating the number of times this rule was 'hit' during the current report interval. A fixed 5 minute report interval is used for the entire system. A trap is not issued if the ACL rule hit count is zero for the current interval. This field is visible for a 'Deny' Action. • Assign Queue - Specifies the hardware egress queue identifier used to handle all packets matching this IP ACL rule. Valid range of Queue Ids is 0 to 6. • Mirror Interface - Specifies the specific egress interface where the matching traffic stream is copied in addition to being forwarded normally by the device. This field cannot be set if a Redirect Interface is already configured for the ACL rule. This field is visible for a 'Permit' Action. • Match Every - Select true or false from the pull-down menu. True signifies that all packets will match the selected IP ACL and Rule and will be either permitted or denied. In this case, since all packets match the rule, the option of configuring other match criteria will not be offered. To configure specific match criteria for the rule, Managing Device Security 446