Netgear M5300-52G3 Web Management User Guide - Page 313

ProSafe M5300 Switch IPv6 Multicast The in the ProSafe M5300 switches support IPv6 multicast routing. From the IPv6 Multicast link, you can access the following pages: • Mroute Table on page 313 • IPv6 PIM on page 314 • MLD on page 321 • Static Routes Configuration on page 329 Mroute Table This screen displays contents of the Mroute Table in tabular form. To display the Mroute Table page, click Routing IPv6 Multicast Mroute Table. Field Source IP Group IP Incoming Interface Outgoing Interface(s) Up Time(hh:mm:ss) Expiry Time(hh:mm:ss) RPF Neighbor Protocol Flags Description The IP address of the multicast packet source to be combined with the Group IP to fully identify a single route whose Mroute table entry. The destination group IP address. The incoming interface on which multicast packets for this source/group arrive. The list of outgoing interfaces on which multicast packets for this source/group are forwarded. The time in seconds since the entry was created. The time in seconds before this entry will age out and be removed from the table. The IP address of the Reverse Path Forwarding neighbor. The multicast routing protocol which created this entry. The possibilities are: • PIM-DM • PIM-SM The value displayed in this field is valid if the multicast routing protocol running is PIMSM. The possible values are RPT or SPT. For other protocols an "------" is displayed. Routing 313