Netgear M5300-52G3 Web Management User Guide - Page 169
Fast Leave Admin Mode, Maximum Response Time
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
ProSafe M5300 Switch MLD VLAN Configuration To access the MLD VLAN Configuration page, click Switching Multicast MLD Snooping MLD VLAN Configuration. 1. Use VLAN ID to set the VLAN IDs for which MLD Snooping is enabled. 2. Use Admin Mode to enable MLD Snooping for the specified VLAN ID. 3. Use Fast Leave Admin Mode to enable or disable the MLD Snooping Fast Leave Mode for the specified VLAN ID. 4. Use Group Membership Interval to set the value for group membership interval of MLD Snooping for the specified VLAN ID. Valid range is (Maximum Response Time + 1) to 3600. 5. Use Maximum Response Time to set the value for maximum response time of MLD Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval - 1).Its value should be less than group membership interval value. 6. Use Multicast Router Expiry Time to set the value for multicast router expiry time of MLD Snooping for the specified VLAN ID. Valid range is 0 to 3600. 7. Click APPLY to apply the new settings to the switch. Configuration changes take effect immediately 8. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Configuring Switching Information 169