Netgear M5300-52G3 Web Management User Guide - Page 428
Captive Portal Configuration, Security, Control> Captive Portal, CP Configuration., CP ID, CP Name
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
ProSafe M5300 Switch Captive Portal Configuration By default, the switch has one captive portal. You can change the settings for that captive portal, and you can also create and configure up to nine additional portals. To display the Captive Portal Configuration page, click Security Control> Captive Portal CP Configuration. 1. Use the CP ID pull-down menu to select the CP ID for which to create or update. 2. Use CP Name to enter the name of the configuration. Name can contain 1 to 31 alphanumeric characters. 3. Use Admin Mode to enable or disable this CP instance. 4. Use Protocol to choose whether to use HTTP or HTTPs as the protocol for the portal to use during the verification process: • HTTP - Does not use encryption during verification. • HTTPS - Uses the Secure Sockets Layer (SSL), which requires a certificate to provide encryption. The certificate is presented to the user at connection time. 5. Use Verification to select the mode for the CP to use to verify clients: • Guest - The user does not need to be authenticated by a database. • Local - The switch uses a local database to authenticated users. • RADIUS - The switch uses a database on a remote RADIUS server to authenticate users. Managing Device Security 428