Netgear M5300-52G3 Web Management User Guide - Page 162

ProSafe M5300 Switch Multicast Router Configuration This page configures the interface as the one the multicast router is attached to. All IGMP packets snooped by the switch will be forwarded to the multicast router reachable from this interface. The configuration is not needed most of the time since the switch will automatically detect the presence of multicast router and forward IGMP packet accordingly. It is only needed when you want to make sure the multicast router always receives IGMP packets from the switch in a complex network. To access the Multicast Router Configuration page, click Switching Multicast  IGMP Snooping  Multicast Router Configuration. 1. Select the check box associated with each interface you want to configure. Select the check box in the heading row to apply the same settings to all interfaces. 2. Use Multicast Router to enable or disable Multicast Router on the selected interfaces. 3. Click APPLY to update the switch with the changes. 4. Click CANCEL to abandon the changes. Configuring Switching Information 162