Netgear M5300-52G3 Web Management User Guide - Page 136
OUI-Based, OUI Based Properties
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
ProSafe M5300 Switch OUI-Based The OUI-based Auto VoIP feature helps provide a classification mechanism for voice packets that include OUI bits so that they can be prioritized above data packets in order to provide better Quality of Service (QoS). From the OUI-based link, you can access the following pages: • OUI Based Properties on page 136 • OUI Port Settings on page 137 • OUI Table on page 138 OUI Based Properties Use this page to configure the VLAN ID for the Auto VoIP VLAN. When the switch identifies voice traffic based on the presence of an OUI, the traffic is placed in the VLAN specified on this page and assigned the selected 802.1p priority value. To display the OUI Based Properties page, click Switching Auto-VoIP > OUI-based > Properties. To configure OUI-based Auto-VoIP properties: 1. From the VoIP VLAN ID menu, select the VLAN used to segregate VoIP traffic from other non-voice traffic. All VoIP traffic that matches a value in the known OUI list gets assigned to this VoIP VLAN. 2. From the OUI-based priority menu, select the 802.1p priority used for traffic that matches a value in the known OUI list. If the Auto VoIP mode is enabled and the interface detects an OUI match, the device assigns the traffic in that session to the traffic class mapped to this priority value. Traffic classes with a higher value are generally used for time-sensitive traffic. 3. Click APPLY to update the switch with the changes. 4. Click CANCEL to abandon the changes. Configuring Switching Information 136