Netgear M5300-52G3 Web Management User Guide - Page 497

ProSafe M5300 Switch Troubleshooting The Troubleshooting menu contains links to the following options: • Ping IPv4 on page 497 • Ping IPv6 on page 498 • Traceroute IPv4 on page 499 • Traceroute IPv6 on page 500 Ping IPv4 Use this screen to tell the switch to send a Ping request to a specified IP address. You can use this to check whether the switch can communicate with a particular IP station. Once you click the APPLY button, the switch will send specified number of ping requests and the results will be displayed. If a reply to the ping is not received, you will see: • Tx = Count, Rx = 0 Min/Max/Avg RTT = 0/0/0 msec If a reply to the ping is received, you will see: • Received response for Seq Num 0 Rtt xyz usec • Received response for Seq Num 1 Rtt abc usec • Received response for Seq Num 2 Rtt def usec • Tx = Count, Rx = Count Min/Max/Avg RTT = xyz/abc/def msec. To access the Ping IPv4 page, click Maintenance  Troubleshooting  Ping IPv4. To configure the settings and ping a host on the network: 1. Use IP Address/Host Name to enter the IP address or Hostname of the station you want the switch to ping. The initial value is blank. The IP Address or Hostname you enter is not retained across a power cycle. 2. Optionally, configure the following settings: Maintenance 497