Netgear M5300-52G3 Web Management User Guide - Page 192

ProSafe M5300 Switch Advanced From the Advanced link, you can access the following pages: • Route Configuration on page 190 • Route Preferences on page 192 Route Preferences Use this panel to configure the default preference for each protocol, e.g., 60 for static routes, 120 for RIP. These values are arbitrary values in the range of 1 to 255 and are independent of route metrics. Most routing protocols use a route metric to determine the shortest path known to the protocol, independent of any other protocol. The best route to a destination is chosen by selecting the route with the lowest preference value. When there are multiple routes to a destination, the preference values are used to determine the preferred route. If there is still a tie, the route with the best route metric will be chosen. To avoid problems with mismatched metrics (i.e., RIP and OSPF metrics are not directly comparable) you must configure different preference values for each of the protocols. To display the Route Preferences page, click Routing Routing Table Advanced  Route Preferences. 1. Use Static to specify the static route preference value in the router. The default value is 1. The range is 1 to 255. 2. Click APPLY to update the switch with the changes. 3. Click CANCEL to abandon the changes. Field Local Description This field displays the local route preference value. Routing 192