Netgear M5300-52G3 Web Management User Guide - Page 472
Trap Logs, Admin Status, Local UDP Port, Monitoring, Logs> Trap Logs
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 472 highlights
ProSafe M5300 Switch 1. Use Admin Status to enable/disable logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts. Disable means no messages will be sent to any collector/relay. Enable means messages will be sent to configured collector/relays using the values configured for each collector/relay. Enable/Disable the operation of the syslog function by selecting the corresponding radio button. 2. Use Local UDP Port to specify the port on the local host from which syslog messages are sent. The default port is 514. Specify the local port in the text field. Field Messages Relayed Messages Ignored Description The count of syslog messages relayed. The count of syslog messages ignored. Trap Logs This screen lists the entries in the trap log. The information can be retrieved as a file by using System Utilities, Upload File from Switch. To access the Trap Logs page, click Monitoring Logs> Trap Logs. Monitoring the System 472