Netgear M5300-52G3 Web Management User Guide - Page 183
Switching, Ports, Port Description, CANCEL, APPLY, characters in length.
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
ProSafe M5300 Switch To access the Port Description page, click Switching Ports Port Description. 1. Select the check box associated with each Port to configure, or select the check box in the header row to apply the same settings to all ports. 2. Use Port Description to enter the description string to be attached to a port. It can be up to 64 characters in length. 3. Click CANCEL to abandon the changes. 4. Click APPLY to update the switch with the values you entered. If you want the switch to retain the new values across a power cycle you must perform a save. Field Port MAC Address PortList Bit Offset ifIndex Description Selects the interface for which data is to be displayed or configured. Displays the physical address of the specified interface. Displays the bit offset value which corresponds to the port when the MIB object type PortList is used to manage in SNMP. Displays the interface index associated with the port. Configuring Switching Information 183