Netgear M5300-52G3 Web Management User Guide - Page 23

ProSafe M5300 Switch Device Status The screen shows the various inventory information for each device. The following table describes the Device Status information. Field Firmware Version Description The release.version.maintenance.build number of the code currently running on the switch. For example, if the release was 8, the version was 0, the maintenance number was 3, and the build number was 11, the format would be 8.0.3.11. Boot Version The version of the boot code which is in the flash memory to load the firmware into the memory. CPLD Version Serial Number The version of the software for the Complex Programmable Logic Device (CPLD). The serial number of this switch. AC Remote The status of the internal AC power module. Indicates the status of the Remote Power Supply (RPS). The status has three possible values: • Not Present: RPS bank not connected • OK: RPS bank connected. • FAIL: RPS is present, but power is failed. PoE Version MAX PoE Version of the PoE controller firmware image. Indicates the status of maximum PoE power available on the switch as follows: • ON: Indicates less than 7W of PoE power available for another device. • OFF: Indicates at least 7W of PoE power available for another device. • N/A: Indicates that PoE is not supported by the unit. Click REFRESH to refresh the system information of the switch. Configuring System Information 23