Netgear M5300-52G3 Web Management User Guide - Page 200

ProSafe M5300 Switch Field VLAN ID Link State OSPF Admin Mode Description Displays the VLAN ID for the interface. The state of the specified interface is either Active or Inactive. An interface is considered active if it the link is up and it is in forwarding state. Displays OSPF admin mode of the interface. The default value is disable. Secondary IP Address To display the Secondary IP Address page, click Routing IP Advanced  Secondary IP. To configure a secondary IP address on an interface enabled for routing: 1. Use Interface to select the interface for which data is to be displayed or configured. 2. Use Secondary IP Address to add a secondary IP address to the selected interface. 3. Use Secondary IP Subnet Mask to enter the subnet mask for the interface. This is also referred to as the subnet/network mask, and defines the portion of the interface's IP Address that is used to identify the attached network. This value is read only once configured. 4. Click ADD to add a Secondary IP Address for the selected interface. 5. Click DELETE to delete the Secondary IP Address from the selected interface. Field VLAN ID Primary IP Address Description The VLAN ID associated with the displayed or configured interface. The Primary IP Address for the Interface. Routing 200