Netgear M5300-52G3 Web Management User Guide - Page 309
BSR Candidate Configuration, Routing, Multicast, PIM-SM, Interface, Priority, Hash Mask Length, DELETE
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
ProSafe M5300 Switch BSR Candidate Configuration The settings on this page are valid for PIM-SM and do not apply if the PIM mode is PIM-DM. To display the PIM BSR Candidate Configuration page, click Routing Multicast PIM-SM BSR Candidate Configuration. To configure a BSR candidate: 1. Use Interface to select the interface for which data is to be configured. 2. Use Priority to enter the priority of C-BSR. 3. Use Hash Mask Length to enter the C-BSR hash mask length to be advertised in bootstrap messages. This hash mask length will be used in the hash algorithm for selecting the RP for a particular group. The valid values are from 0 to 32. Default value is 30. 4. Click DELETE to delete the RP address selected. 5. Click REFRESH to refresh the data on the screen with the latest PIM-SM neighbor information. Field IP Address Next bootstrap Message Next Candidate RP Advertisement Description Displays the IP address of the Elected BSR. Time (in hours, minutes, and seconds) in which the next bootstrap message is due from this BSR. Time (in hours, minutes, and seconds) in which the next candidate RP advertisement will be sent. Routing 309